Pattern and technical guide

05/06/2026

Fit problem and solution guideline-2

Problem-Front part and back part not in balance, front part pulls up at center front area.


Solution- need to add more front length (1.5 to2cm). Pls change pattern like above right-side photo and increase shoulder slanting as well only at front.

05/06/2026

Fit problem and solution guideline-1

Problem- Inside leg length looks shorter.
Solution- According to customer required length- need to increase the inseam or reducing the side seam length.

05/06/2026

How to Measure Button Ligne (L)

Do you know how to measure button ligne? If not, let's take a look.

Button Ligne (L) = Diameter in Millimeters (mm) ÷ 0.635

Ligne (L) is the standard international unit used by garment manufacturers and merchandisers to measure and communicate button sizes.

Basic Standard

• 1 inch = 40 Ligne (40L)
• 1 Ligne (L) = 0.635 mm

Formulas and Calculations

1. To Find Ligne (L) from Millimeters (mm)
Formula:
Button Ligne (L) = Diameter (mm) ÷ 0.635
Example:
Button diameter = 15 mm
15 ÷ 0.635 = 23.62L ≈ 24L
Therefore, a 15 mm button is approximately 24L.

2. To Find Millimeters (mm) from Ligne (L)
Formula:
Button Diameter (mm) = Ligne (L) × 0.635
Example:
Button size = 20L
20 × 0.635 = 12.7 mm
Therefore, a 20L button has a diameter of 12.7 mm.

3. To Find Ligne (L) from Inches
Formula:
Button Ligne (L) = Diameter (inch) ÷ 0.025
Example:
Button diameter = 0.35 inch
0.35 ÷ 0.025 = 14L
Therefore, a 0.35-inch button is approximately 14L.

Understanding button ligne measurements helps ensure accurate communication and consistency when developing garments and sourcing trims.

04/06/2026

Hello, I am a garment technical consultant with 34 years experience in knit & woven garments.

I provide freelance support for:

- fit review
- measurement correction
- pattern guidance

If you ever need technical support for your garments, I can help part-time.

Thank you.

04/06/2026

I am a Garment Technical Consultant with 34 years of experience in the apparel industry (Knit & Woven).

I provide freelance technical services:

✔ Measurement chart development & correction
✔ Fit review & sample analysis
✔ Pattern guidance & correction advice
✔ Production problem solving

This service is available for:

- Small clothing brands
- Online fashion shops
- Boutique businesses
- Garment factories

If you need technical support, feel free to inbox this page.

Available part-time (evenings & weekends).

18/01/2025

👕 Men’s Half Shirt
✅ Fabric: ১০০% লিনেন কটন (সফট গার্মেন্টস ওয়াশ)
✅ Sizes: M, L, XL
✅ Measurements:

M: ১/২ চেস্ট - ২০", লেংথ - ২৯"
L: ১/২ চেস্ট - ২১", লেংথ - ৩০"
XL: ১/২ চেস্ট - ২২", লেংথ - ৩১"
👖 Men’s Cargo Jogger
✅ Fabric: ৯৫% কটন, ৫% ইলাস্টিক (টুইল ফ্যাব্রিক)
✅ Sizes: S, M, L
✅ Measurements:

S: ১/২ ওয়েস্ট রিলাক্সড - ১৪", লেংথ - ৩৬"
M: ১/২ ওয়েস্ট রিলাক্সড - ১৫", লেংথ - ৩৭"
L: ১/২ ওয়েস্ট রিলাক্সড - ১৬", লেংথ - ৩৮"

11/01/2025

Dear all my friend, pls follow my Online clothing page. AUAR-ofc.
https://www.facebook.com/Auraofcfashion?mibextid=ZbWKwL

06/10/2024

06/10/2024