Basic tips on Tailoring work

Basic tips on Tailoring work Male & Female Fashion Drafting

How to cut Puff hand/sleeve
09/08/2026

How to cut Puff hand/sleeve

Tailor to Tailor Sometimes, the problem is not the fabric or the sewing machine. A small mistake during measurement, dra...
09/08/2026

Tailor to Tailor
Sometimes, the problem is not the fabric or the sewing machine. A small mistake during measurement, drafting, cutting, or fitting can affect the entire outfit.
Here are 5 common mistakes every tailor should watch out for:
1️⃣ Wrong body measurements
One incorrect measurement can affect the final fitting.
2️⃣ Incorrect seam allowance
Your seam allowance must be consistent and suitable for the garment.
3️⃣ Wrong bust-point placement
Incorrect bust-point placement can affect the shape and fitting around the bust.
4️⃣ Ignoring the behaviour of the fabric
Different fabrics stretch, shrink, and drape differently. Always consider your fabric before cutting.
5️⃣ Skipping proper fitting
Don't rush to finish an outfit without checking the fitting first. A proper fitting can help you identify and correct mistakes early.
💡 Remember: Good sewing starts with accurate measurement and proper drafting.
👇 TAILORS, WHICH OF THESE MISTAKES HAVE YOU EXPERIENCED BEFORE?
Drop your answer in the comment section. 👇🏽
📌 Save this post for future reference.
🔄 Share it with another tailor who needs to see this.
❤️ Follow Basic Tips on Tailoring Work for more practical tailoring lessons.

Bomber jacket How to draft itStep 1: Prepare the Front BodiceSet Up the Base: On a large sheet of pattern paper, draw a ...
08/08/2026

Bomber jacket

How to draft it

Step 1: Prepare the Front BodiceSet Up the Base: On a large sheet of pattern paper, draw a vertical line near the edge to represent the Center Front (CF). Add a 1-inch extension parallel to this line for the zipper allowance.Determine Length: Mark your full length from the top shoulder line down. Subtract 2 to 2.5 inches from the total length to account for the ribbed waistband that will be added later.Neckline: Mark a width of 2.5 to 3 inches along the top line, and a depth of 3 inches down the CF line. Connect these points with a smooth curve.Shoulder & Armhole: Measure half of your shoulder width from the CF. Slant down by 1 inch to create the shoulder slope. Calculate your armhole depth (typically \(\frac{\text{Bust}}{6} + 1.5\text{ inches}\)) and draw a curved armhole line.Add Body Ease: Divide your bust/chest measurement by 4. Add 1 to 2 inches of ease to this value to ensure a loose, jacket-like fit. Drop this measurement straight down to the hem to maintain a boxy, traditional bomber silhouette.

Step 2: Draft the Back BodiceTrace the Front: Place a fresh piece of pattern paper under or next to your front bodice block. Trace the side seam, hemline, and outer shoulder point.Remove Zip Allowance: Ensure the Center Back (CB) line is cut on the fold, meaning it does not include the 1-inch zipper extension used on the front panel.Adjust Neckline: The back neck drop is much shallower than the front. Mark 0.75 inches down from the top line at the CB and curve it up to meet the inner shoulder point.Adjust Armhole: The back armhole requires less curvature than the front to allow for movement. At the midpoint of the armhole curve, extend outward by 0.75 inches and draw a flatter, shallower curve down to the side seam.

Step 3: Draft the SleeveSleeve Cap: Draw a vertical line matching your sleeve length (minus 2 inches for the wrist cuff). Use your armhole measurements from the bodice to draft a shallow, flat sleeve cap typical of dropped-shoulder outerwear.Sleeve Width: Keep the biceps and forearm areas wide to ensure it fits comfortably over underlayers. Taper slightly toward the wrist, but leave enough width to create gentle pleats or gathers when attaching the elastic cuff.

Step 4: Draft the Ribbed Trim & CollarsNeck Band/Collar: Measure the total curve of your front and back necklines (excluding the zipper allowance). Recreate this length on a folded piece of paper with a height of 1.5 to 2 inches. Curve the front edge slightly using a French curve so it sits flat against the neck.Waistband & Cuffs: Measure the total bottom width of your assembled jacket pieces. Subtract 2 to 4 inches from this total measurement to ensure the ribbed knit fabric stretches and pulls the jacket hem snugly against your waist. Repeat this compression drafting for the wrist cuffs.

🧵 COMMON MISTAKES TO AVOID WHEN TAKING YOUR CLIENT’S MEASUREMENTS 📏✂️Taking accurate measurements is one of the most imp...
08/08/2026

🧵 COMMON MISTAKES TO AVOID WHEN TAKING YOUR CLIENT’S MEASUREMENTS 📏✂️

Taking accurate measurements is one of the most important steps to achieving a perfect fit. A small mistake in measurement can affect the entire garment.

Here are some common mistakes every fashion designer should avoid:

❌ 1. Measuring Over Thick Clothes
Avoid taking measurements over bulky or thick clothing because it can add extra inches and hide the client’s actual body shape. Whenever possible, measure over fitted clothing.

❌ 2. Pulling the Tape Too Tight or Too Loose
A tape that is too tight gives smaller measurements, while a loose tape gives bigger measurements. Keep the tape snug against the body without squeezing it.

❌ 3. Placing the Tape Slanting
A crooked or slanted tape can give you inaccurate measurements. Always ensure the tape is straight, flat, and parallel to the floor where necessary.

❌ 4. Ignoring Proper Body Posture
Some clients may suck in their stomach, hold their breath, or stand unnaturally. Ask your client to stand comfortably and naturally while taking measurements.

❌ 5. Ignoring Proper Undergarments
For accurate bust measurements, the client should wear a properly fitted bra. This helps you correctly identify important points such as the bust point and bust span.

❌ 6. Measuring Only Once
Never depend on a single measurement. Double-check your figures before cutting the fabric. A few extra seconds of checking can save you from wasting hours of sewing and costly materials.

⭐ BONUS TIP:
Always write down each measurement immediately and clearly. Don't rely on memory!

📌 Remember:
Accurate measurements = Accurate drafting = Better fitting garments.

To every fashion designer and apprentice: Take your measurements seriously. The quality of your finished garment starts from the measuring tape! 🧵✂️

08/08/2026

Tutorial on how to cut your pant Trouser

Essential Measurements for 6 pieces Skirt
07/08/2026

Essential Measurements for 6 pieces Skirt

COMMON MISTAKES EVERY TAILORING APPRENTICE SHOULD AVOIDSuccess in fashion design is not only about knowing how to sew. I...
07/08/2026

COMMON MISTAKES EVERY TAILORING APPRENTICE SHOULD AVOID

Success in fashion design is not only about knowing how to sew. It is also about developing the right skills, discipline, and attitude. Avoid these common mistakes if you want to become a professional tailor.

✂️ Technical & Cutting Mistakes

✅ Taking Wrong Measurements
Never rush when taking body measurements. Always measure carefully and double-check every figure. A small mistake can make a garment too tight or too loose.

✅ Cutting Without Chalk Markings
Avoid cutting fabric freehand. Always mark your pattern lines with tailor's chalk before cutting to achieve neat and accurate pieces.

✅ Ignoring the Iron
Press your fabric and seams throughout the sewing process. Don't wait until the garment is finished. Proper pressing gives your work a clean, professional appearance.

✅ Using the Same Armhole Shape for Front and Back
The front and back armholes are not exactly the same. Cutting them alike can cause poor fitting, bunching, and discomfort around the chest.

📚 Attitude & Learning Mistakes

✅ Rushing to Become Independent
Don't hurry to open a shop or start sewing for customers before mastering the fundamentals. Build your skills first.

✅ Ignoring Corrections
When your instructor or master corrects you, learn from it. Repeating the same mistakes only slows your progress.

✅ Thinking You Already Know Everything
Fashion design is a continuous learning journey. Stay humble, keep practicing, and never stop improving.

Remember: Great tailors are not made overnight. Patience, consistent practice, and attention to detail are the keys to becoming a professional fashion designer.

– Basic tips on Tailoring work

Time 1pmTopic 🔽🔽
07/08/2026

Time 1pm
Topic 🔽🔽

Motivational Speech to Every Fashion DesignerGood day, everyone.Today, I want to remind every fashion designer—both begi...
06/08/2026

Motivational Speech to Every Fashion Designer

Good day, everyone.

Today, I want to remind every fashion designer—both beginners and professionals—that success in fashion is not determined by how long you have been sewing, but by your willingness to keep learning and improving.

To those who are just starting, don't be afraid to make mistakes. Every successful designer once struggled to cut fabric correctly, sew straight lines, or take accurate measurements. Don't compare your beginning to someone else's success. Focus on learning one skill at a time, practice every day, and remain patient. Your consistency will eventually speak for itself.

To experienced and advanced designers, remember that learning never ends. Fashion keeps evolving, and the best designers are those who continue to improve their knowledge and skills. Stay humble, embrace new ideas, and be willing to mentor the next generation of designers. Your legacy is not only the clothes you make but also the lives you inspire.

Never let temporary challenges make you abandon your dream. There will be times when customers are few, money is limited, or projects don't go as planned. Those moments are not signs to quit—they are opportunities to become stronger, wiser, and more determined.

Let your work represent excellence. Be honest with your clients, value your time, deliver quality garments, and always give your best. A satisfied customer is the greatest advertisement any fashion designer can have.

Remember that fashion is more than sewing fabric together. It is the art of creating confidence, expressing creativity, and transforming ideas into reality. Every garment you produce tells a story about your dedication and professionalism.

So, rise above fear, reject excuses, and pursue excellence every single day. Keep practicing, keep improving, and never stop believing in yourself.

The future belongs to those who are willing to learn, work hard, and remain faithful to their dreams. Your breakthrough is closer than you think.

Thank you, and I wish every fashion designer greater success, endless creativity, and a future filled with remarkable achievements.

Follow
Mrr Tammie

Identifying line on the measurement tape
05/08/2026

Identifying line on the measurement tape

Address

Bori

Website

Alerts

Be the first to know and let us send you an email when Basic tips on Tailoring work posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category