เว็บไซต์คืออะไร?

https://www.facebook.com/163523443518072/

Dandy M.

500+ Workouts since March 2024
5 Car Crashes | Was 56kg | Lifting 170kg Deadlift
Pain Free | Training in BKK 🇹🇭
My Training Log 👇 | 🎥 ig:

16/05/2026

490 calories. 30g protein. Before the noise.

Fried eggs, sardines, sourdough bread with extra virgin olive oil. Ten minutes to make.

Eggs for muscle repair. Sardines for omega 3 and clean protein. Olive oil for healthy fat that keeps you full. Simple food that does serious work.

What you choose first sets everything else in motion.

08/04/2026

Most people guess the wrong ab muscle. 🧩

If you guessed lower abs you are one of the few. Most people see a decline bench and think upper abs or core broadly. They are missing the specific target entirely. ❌

The target muscle is the lower abs. One of the hardest parts of the core to feel and the part most ab exercises do not emphasise directly.

This is the Decline Dragon Flag Progression. I am lying on a decline bench with my head at the top holding the rope handles for stability. The rope is my anchor point. It locks my upper body in place so my lower abs and core do the majority of the work controlling the movement.

The lift starts by raising my legs toward the ceiling with a slight bend in the knees. At the top I pull into a C curve by drawing my hips up and tucking my core tight. Then I lower slowly and under control. That descent is where the lower abs work the hardest. Fighting gravity on the way down is what builds the strength.

This is my progression toward a full dragon flag. One of the most challenging bodyweight movements you can work toward. You cannot fake it. Your core either has the strength or it does not.

I am 42 in Bangkok building real core strength with zero shortcuts. I stopped surviving the set and started anchoring it. ⚓

Are you working toward a dragon flag or have you already achieved it? Let me know below. 👇

Save this if you want to build serious core strength. 🤝

07/04/2026

Most people guess shoulders. But do you know which area? 🧩

If you guessed rear delts you are one of the few. Most people think side shoulder. They are looking at the wrong part entirely. ❌

The target muscle is the rear delt. The back of your shoulder that most people never feel because their traps take over before the rear delt gets a chance to work.

This is the Sideways Pec Deck Rear Delt Fly. Sitting sideways and pulling the handle back in a wide arc places greater emphasis on the rear delt rather than the side shoulder. Your torso stays fixed. The movement becomes harder to cheat than a standing
variation.

The pronated grip keeps the focus on the rear delt. Think about leading with your pinky as you pull. That one adjustment helps keep the tension where it needs to be.

I am 42 in Bangkok building stronger shoulders with logic and zero wasted movement. I stopped surviving the set and started anchoring it. ⚓

Have you tried training rear delts this way? Does it work for you? Let me know below. 👇

Save this to finally feel your rear delts on your next shoulder day. 🤝

03/04/2026

Most people guess back or glutes. 🧩

If you guessed hamstrings you are one of the few. Most beginners never feel this in their legs at all. ❌

This is the Barbell RDL on a step platform. The elevated position increases range of motion and gets a deeper stretch in the hamstrings at the bottom. The hip hinge is the engine. Your hamstrings are the fuel.

By keeping a soft bend in your knees and pushing your hips back you stretch the hamstrings under load. The deeper you hinge with control the more they have to work to pull you back up.

Keep the bar close to your legs the entire way down. That is your anchor point. The moment it drifts forward your lower back takes over and your hamstrings switch off.

Most lifters never feel this because they bend their knees too much and turn it into a squatty deadlift. Keep your knees soft but fixed. Push your hips back until you feel that pull. That is the sweet spot.

I am 42 in Bangkok building stronger legs with logic and zero ego. I stopped surviving the set and started anchoring it. ⚓

Did you guess hamstrings or were you surprised? Let me know below. 👇

Save this to finally feel your hamstrings on your next leg day. 🤝

02/04/2026

Most people guess quads or back. 🧩

The real target is your glutes and inner thighs. But that is only half the story. What nobody expects is that your biceps are working the entire time just to hold the bar in place. ❌

This is the Wide Stance Smith Machine Zercher Squat. After hearing three pops in my back a few weeks ago I had to stop putting heavy bars on my neck. This is my reset button. Holding the bar in the crooks of my elbows shifts the load to the front which forces my torso to stay upright and takes pressure off my lower back.

The wide stance changes everything. By stepping your feet out wider your glutes and inner thighs have to do the heavy lifting to drive you back up. Your arms are not curling the weight. They are isometrically holding it to create a rigid anchor point. Your core has to work harder because the forward load is constantly pulling you out of position.

The Smith machine and safeties are my insurance policy. The fixed path removes the balance struggle and the safeties give me a safe exit if I need one. No ego. Significantly less vertical pressure on the spine. Just pure tension where it counts.

I am 42 in Bangkok building stronger legs with logic and zero ego. I stopped surviving the set and started anchoring it. ⚓

Did you guess quads or did the wide stance surprise you? Let me know below. 👇

Save this for your next leg day. 🤝

01/04/2026

Most lifters guess back. 🧩

If you guessed back you are only seeing the end of the move. Most people miss the real engine because this looks exactly like a back exercise from the outside. ❌

The answer is your quads. This is a leg drive drill disguised as a row.

A few weeks ago I was pulling 130kg on a conventional deadlift and heard three pops in my lower back. I was pulling with my arms instead of pushing with my legs. This is my drill to fix that coordination. By positioning myself closer to the pad I force my quads to initiate the movement before my upper body gets involved.

This is the Quad Drive Anchor. You brace your core before you even start the movement. Then you push the platform away with your legs. That is the quad drive phase. Once the bar passes your knees hinge at the hip and let your upper body follow. If you are doing it right your lats will naturally activate to stabilise the load. This builds the habit of leading with your legs before your back takes over.

The physics is simple. Many people including myself have hurt their back because their legs stop pushing and their arms start pulling too early. In this edit I am pulling 130kg which is the full stack. By practising this leg drive on a horizontal cable you build better awareness of initiating with your legs rather than your arms. No ego. Significantly less vertical pressure on the spine. Just smart mechanics.

I am 42 in Bangkok rebuilding my strength with logic and zero ego. I stopped surviving the set and started anchoring it. ⚓

Did you see the leg press or the back row? Let me know below. 👇

Save this to save your back on your next pull day. 🤝

31/03/2026

Most lifters see a row and think lats. 🧩

Lats are involved. But here is what most people miss. The way you set up the row decides which muscles actually do the work. Most people find it hard to feel their rear delts on a standing row because there is nothing stopping the body from using momentum. ❌

In a standard barbell row you are standing and pulling with your whole body. Your lower back ends up doing most of the stabilising. Your rear delts barely get a chance. Both setups have their place. It just depends on what you are trying to target.

Anchor your chest and your rear delts finally show up.

This is the 30 Degree Incline Smith Row. The target muscles are the rear delts and upper back. Pin your chest to the bench at 30 degrees and your body stops moving. The Smith machine keeps the bar on the same path every rep. Your lower back mostly stays out of it. Your rear delts and upper back have to do the work.
No swinging. No lower back taking over. Just your upper back doing what it is supposed to do.

I am 42 in Bangkok building a stronger back with zero wasted energy. I stopped surviving the set and started anchoring it. ⚓

Can you feel the difference between a standing row and this setup? Let me know below. 👇

Save this to fix your posture on your next back day. 🤝

30/03/2026

Most people never actually feel incline press in their upper chest.

Here is why and here is the fix. 🧩

You are probably using a standard grip on a 45 degree incline. This often causes shoulder discomfort and can shift more of the load toward your front delts and away from your upper chest. ❌

This is the Underhand Smith Anchor Press. By switching to a reverse grip and setting the bench to 30 degrees incline you place greater emphasis on the upper chest. The Smith machine with safeties allows for a controlled rep range to rebuild strength without the risk of injury.

The physics is simple. Most lifters arch their back or set the angle too high. This turns the move into a flat press or a shoulder press.

Keeping your spine flat against the bench at 30 degrees maintains the tension on the upper chest. The underhand grip keeps your elbows tucked and your joints in a more natural position. No shoulder pinch. No wasted energy. Just a deep contraction on the upper chest.

I am 42 in Bangkok building a stronger chest with zero wasted energy. I stopped surviving the set and started anchoring it. ⚓

Have you ever tried an underhand grip for chest? Can you feel the difference? Let me know below. 👇

Save this to fix your upper chest on your next push day. 🤝

28/03/2026

Fix your tricep tension. 🧩

You are probably doing overhead extensions standing up. This leads to a lower back arch and swinging elbows just to move the weight. You are leaking tension away from the muscle and risking a joint flare up.

This is the Tricep Bench Anchor Extension. By pinning your upper arm to the bench you create a fixed hinge at the elbow. That removes all body momentum and significantly reduces shoulder and back involvement. The cable tension goes directly into the tricep long head through the full range of motion.

The physics is simple. The overhead position puts the long head of the tricep into a deep stretch. That is the largest part of the tricep and the hardest to hit with standard pushdowns. The bench keeps your upper arm locked so the only thing moving is your forearm. No arch. No swing. Just pure tricep contraction.

I am 42 in Bangkok building bigger arms with zero wasted energy. I stopped surviving the set and started anchoring it. ⚓

Do you feel your lower back arching when you do overhead extensions? Let me know below. 👇

Save this to fix your tricep growth on your next arm day. 🤝

ที่อยู่

Bangkok