In'Carius Craft

In'Carius Craft "In'Carius Craft" to pracownia rzemieślnicza specjalizująca się w broni białej i elementach skórzanych dla rekonstruktorów historii z wszelakich epok.

Wszystkie zdjęcia przedstawiają realne wytwory moich rąk. W przedmioty wykonywane przez siebie wkładam mnóstwo pasji, czasu i twórczego zapału. Miecze, sztylety, noże - tutaj każdy rycerz znajdzie coś dla siebie. Zapraszam do komentowania, oceniania i pytań.

//All photos show my own handmade stuff. I put a lot of passion, time and creative output in my crafts. Here every knight can find something what is right for him. Feel free to comment, apprise and ask me anything

19/05/2026

AVAILABLE as a bare blade

Material forged by Konrad Baron from K720 and 15n20 steel. Rest work by myself (making the shape and distal taper, making fullers, polishing, tempering, sharpening etc etc) :)

The most precious blade so far

Totally length 94cm
Blade length 75.5cm
Tang length 18.4cm
Width at base 5.2cm
Weight 870g
PoB 28cm

AVAILABLE Another "Norman" sword, this time with brass inlay (crosses on each side of fuller).Totall length - 105mBlade ...
19/05/2026

AVAILABLE

Another "Norman" sword, this time with brass inlay (crosses on each side of fuller).

Totall length - 105m
Blade length - 88.5cm
Width - 5cm near guard
Weigth - 1260g
Grip - around 10.5cm
Steel - 51CrV4
Edges - sharp

Enjoy.
Rafal 🙂

19/05/2026

Bare blade still available

A little blast from the past. Kriegsmesser and messer with decorated scabbards :) Unfortunately dont have photos with th...
24/04/2026

A little blast from the past. Kriegsmesser and messer with decorated scabbards :) Unfortunately dont have photos with the painted scabbard - shipped before have a proper time to make some

23/04/2026

Bare blade still available - 700 euro + shipping

A hand and half with a hollow grind crossection. Light and stiff piece. Sharp edges, simple scabbard. As always hand mad...
23/04/2026

A hand and half with a hollow grind crossection. Light and stiff piece. Sharp edges, simple scabbard. As always hand made :)

Dimensions:

Totally length - 121.5cm,
Blade length -93.5cm,
Weight -1260g
THickness at base - 8mm,
Hollow grind crossection,
Balance - 8cm
Edges - Sharp

Scabbard with spodem core, whole covered by calf leather

Hello!Today a little bit sad story - i made this sword for my trust worthy customer - agreed for payment 50/50 (second p...
07/03/2026

Hello!

Today a little bit sad story - i made this sword for my trust worthy customer - agreed for payment 50/50 (second part after delivery. Payed a lot for shipping due he wanted to get sword before Christmas - partialy my fault, this order was delayed). So... Somebody got sword on the cost of making :) if You know the owner wish him luck (delivery was the 24th december and still wait for any response)

I would like to say hello to Yuylian from Sofia :)

Another try with this oneAVAILABLE- open for offers After very long break im back on track - last months was quite hard....
06/03/2026

Another try with this one

AVAILABLE- open for offers
After very long break im back on track - last months was quite hard. A lot of failure in workshop (tools, machines, light), some problems with health and winter slower my work a lot. Here is one of swords which I finish in last year but I wasn't able to publish.
Not quite historical piece - some wariations on very light and quick hand and half longsword (but due the specs can be use easilly in one hand). Fitting's blackened in beeswax.
Stat's:
Totall length - 112cm
Blade length - 88cm
Width - 5cm near guard
Weigth - 1169g
Grip - 16cm + 7cm of pommel
Steel - 51CrV4
Edges - sharp
Enjoy.
Rafal 🙂

Aother "Norman" sword, this time with brass inlay (crosses on each side of fuller).Totall length - 105mBlade length - 88...
06/03/2026

Aother "Norman" sword, this time with brass inlay (crosses on each side of fuller).

Totall length - 105m
Blade length - 88.5cm
Width - 5cm near guard
Weigth - 1260g
Grip - around 10.5cm
Steel - 51CrV4
Edges - sharp

Enjoy.
Rafal 🙂

03/03/2026

Available - second pattern welded triple fullered spatha blade (only for few days, before ill start the grip).

Material forged by Konrad Baron from K720 and 15n20 steel. Rest work by myself (making the shape and distal taper, making fullers, polishing, tempering, sharpening etc etc) :)

Totally length - 92cm
Blade length - 75.5cm
Blade width - 5.3cm
Blade thickness - around 5.7mm near guard and tapering to around 2.5mm near tip
Weight - 950g

Enjoy! Regards Rafal

still available, price drop to the 600 euro
03/03/2026

still available, price drop to the 600 euro

Adres

Chrzanów

Strona Internetowa

Ostrzeżenia

Bądź na bieżąco i daj nam wysłać e-mail, gdy In'Carius Craft umieści wiadomości i promocje. Twój adres e-mail nie zostanie wykorzystany do żadnego innego celu i możesz zrezygnować z subskrypcji w dowolnym momencie.

Skontaktuj Się Z Firmę

Wyślij wiadomość do In'Carius Craft:

Skróty

Udostępnij