What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

http://WWW.RICHINDUSTRIESINC.COM/

Rich Industries, Inc., 2384 BRIGHTWOOD Road SE, New Philadelphia, OH (2026)

11/22/2021

LEVEL B AIR SUPPLY OUTER PROTECTIVE GARMENT
Rich Industries Number: 3907 & 3908
Level B Outer Protective One-Piece Garments 100% made in the USA.
Fabricated under the Quality Assurance standards set forth in ANSI/ASME NQA-1 Program to meet the strict requirements of the nuclear industry.
Constructed using 2-ply Saranex and reinforcing NFPA-701 flame resistant scrim for maximum protection and strength.
Oversized to allow wearer maximum interior mobility.
Heavy duty front zipper entry providing effortless donning and doffing with easy to grasp zipper pulls allowing user quick escape.
Air supply adaptability.
Oversized hood with full 360° visibility.
Respirator style exhalation valves.
Pass through air inlet tube.
Attached heavy duty boots with 150 Mil non-skid sole and adjustable boot straps.
Heavy duty rigid cuffs.
Rich Industries, Inc. Level B suits were designed for use in areas of radiological airborne contamination.
All seams are 3/4" RF welded for superior strength and durability.
Available with attached knee pads
Rich Industries, Inc. currently has the Level B suit materials tested in accordance with ASTM F 2704, which includes the following methods:

ASTM D 5034 (Tensile Properties)
ASTM D 3787 (Burst Strength)
ASTM D 2582 (Puncture Propagation and Tear Resistance)
ASTM D 3884 (Taber Abrasion)
ASTM D 751 (Seam Strength)
ASTM D 4757 (Abrasion Resistance )
ASTM D 739 (Chemical Permeation for Carbon Tetrachloride, Nitric Acid, Hydraulic Fluid & Perspiration)

11/02/2021

QUALITY IS THE STANDARD AT RICH INDUSTRIES
Rich Industries Quality Assurance Department (QAD) is responsible for reviewing customer drawings and/or specifications, generating inspection and test procedures to supplement a customer's drawings and/or specifications, and preparing the necessary procedures for meeting the customer's quality standards. The QAD is provided with the necessary freedom to identify any quality assurance problems and to recommend and initiate any solutions. The management and staff of Rich Industries, Inc. fully endorses and consents to the rigid standards set forth by the QAD.

You can have confidence that Rich Industries' products will meet your industry standards. Rich Industries Quality Management System (QMS) complies with ASME/ANSI Nuclear Quality Assurance (NQA-1 Sections: 1,2,4-18.

Every product we manufacture has specific quality standards based upon customer requirements and/or our own internal standards.

From product planning to shipment, quality plays an integral role in every operation we perform.

Rich Industries strives to continually improve its QMS and reduce non-value added operations in an effort to provide you with the highest quality products and expedited delivery. All, at a low cost!
TEST METHODS AND STANDARDS
Rich Industries is familiar and have knowledge/experience with the following test methods and standards plus many more...
A-A-55308
AGS-G002-1998
ANSI/ASQC Z1.4 2003
ASTM D 1117
ASTM D 1593-99
ASTM D 5035-95
ASTM D 618-00
ASTM D 638-00
ASTM D 882
DIN EN 1073-1:1998
FAR 52.246-2
Fed Std 751a
HH-B-100B
LP 375 D
LP 378 E
Method 191A
Mil A 24914 (NU) Notice 1
Mil Dtl-117H
Mil I 45208A
Mil P 116J
Mil P 24466B(SH)
Mil Spec AA55126A
Mil Spec C43303B
Mil Std 105E
Mil Std 129
Mil Std 1487
Mil Std 2041
Mil Std 2073
Mil-C-21851E
Mil-C-43006F
NFPA 701
NQA-1
Spec FMVSS302
Spec PPP-B-1136D
SS 480
SS 481 Rev. 2
SS 482 Rev. 1
SS 507 Rev. Orig. IC #1

Customized drawings, specs and standards per customer requests
A copy of our Quality Assurance Manual is available for review upon written request and approval from our Quality Assurance Manager.

10/25/2021

RADIOLOGICAL (CONTAMINATION CONTROL)
Rich Industries, Inc. manufactures the widest variety of Radiological (Contamination Control) CONTAINMENTS in the United States and abroad. Our CONTAINMENTS were developed through many years of experience with and for customers just like you. Our CONTAINMENTS are used throughout the United States Navy Nuclear Program, the United States Department of Energy, electrical utility plants, the pharmaceutical industry, research laboratories, chemical plants, and environmental clean-up sites. These CONTAINMENTS are custom manufactured directly to your standards and specifications. Additionally, our CONTAINMENTS are manufactured to meet or exceed the requirements of the American Glovebox Society standard AGS-G002-1998.

GLOVEBAG CONTAINMENTS
Because of the wide variety of our CONTAINMENTS and the materials we use in the manufacture of them, the possibilities are endless. Use of our flexible GLOVEBAGS and GLOVEBOX CONTAINMENTS, enable you, the user, to confine the spread of contamination or enclose a contaminated item in a small work area. The user can do repairs and manipulations without direct contact of contaminated surfaces wearing a minimum of protective clothing.

10/13/2021

Rich Industries now has Transfer tubing with less coefficient of friction in Green and Yellow Translucent Urethane, both in 8mil and 12mil thicknesses.

TRANSFER TUBING FOR BULK POWDER AND DRY SOLIDS

Item Code Item Code Description
Retail pricing is per cut foot or per 10 ft section
12-33TFYTL984 012" X 33" TUBE FORM YTL ETHER
12-48TFYTL1703 012" X 48" TUBE FORM YTL ETHER
12-42TFYTP1702 012" X 42" YTP ETHER TUBE FORM
08-28TFYTL1703 008" X 28" TUBE FORM YTL ETHER
08-38TFYTES1703 008" X 38" TUBE FORM YTL ESTER
08-36TFYTL1703 008" X 36" TUBE FORM YTL ETHER
08-24TFYTL1703 008" X 24" TUBE FORM YTL ETHER
08-28TFYTL984 008" X 28" TUBE FORM YTL ETHER
08-28TFGTLES984 008" X 28" TUBE FORM GTL ESTER
08-24TFYTL984 008" X 24" TUBE FORM YTL ETHER
08-24TFYTLS1703 008" X 24" TUBE FORM YTL ESTER
12-39TFYTL1703 012" X 39" TUBE FORM YTL ETHER
08-38TFYTL984 008" X 38" TUBE FORM YTL ETHER

10/11/2021

LEVEL B AIR SUPPLY OUTER PROTECTIVE GARMENT
Rich Industries Number: 3907 & 3908
Level B Outer Protective One-Piece Garments 100% made in the USA.
Fabricated under the Quality Assurance standards set forth in ANSI/ASME NQA-1 Program to meet the strict requirements of the nuclear industry.
Constructed using 2-ply Saranex and reinforcing NFPA-701 flame resistant scrim for maximum protection and strength.
Oversized to allow wearer maximum interior mobility.
Heavy duty front zipper entry providing effortless donning and doffing with easy to grasp zipper pulls allowing user quick escape.
Air supply adaptability.
Oversized hood with full 360° visibility.
Respirator style exhalation valves.
Pass through air inlet tube.
Attached heavy duty boots with 150 Mil non-skid sole and adjustable boot straps.
Heavy duty rigid cuffs.
Rich Industries, Inc. Level B suits were designed for use in areas of radiological airborne contamination.
All seams are 3/4" RF welded for superior strength and durability.
Available with attached knee pads
Rich Industries, Inc. currently has the Level B suit materials tested in accordance with ASTM F 2704, which includes the following methods:

ASTM D 5034 (Tensile Properties)
ASTM D 3787 (Burst Strength)
ASTM D 2582 (Puncture Propagation and Tear Resistance)
ASTM D 3884 (Taber Abrasion)
ASTM D 751 (Seam Strength)
ASTM D 4757 (Abrasion Resistance )
ASTM D 739 (Chemical Permeation for Carbon Tetrachloride, Nitric Acid, Hydraulic Fluid & Perspiration)

https://www.richindustriesinc.com/View%20the%20Level%20B%20Suit%20in%20use

10/11/2021

Now Hiring!!!
Press operators needed for immediate openings!
NOW HIRING!
COMPETITIVE WAGES
COMPETITIVE BENEFITS
CURRENTLY DAY SHIFTS
AIR CONDITIONED FACILITY
COME WORK WITH US TO MAKE OTHER’S LIVES BETTER AND WE WILL WORK WITH YOU TO MAKE YOUR LIFE BETTER
APPLY IN PERSON OR ONLINE
2384 BRIGHTWOOD RD SE
[email protected]
330-339-4113

10/08/2021

RICH INDUSTRIES #: 5550-Y
24" Diameter Yellow Transparent Polyester Polyurethane
With Drain Tube
This drip funnel is made of an .008" thick Transparent Yellow Polyester Polyurethane has a 24" diameter, four tie offs (comprised of the same material as the funnel), a 1/2" diameter low density polyethylene support ring and a 30" drain tube.

Drip funnels are commonly manufactured using the following criteria:

Material: PVC, Polyester Polyurethane, Polyethylene

Thickness: .006 -.012

Diameter: 12" - 40"

Color:Yellow, Green, Clear

Transparency:Transparent, Translucent, Opaque, Clear

Drip funnels can be made with or without a drain tube

Drain tubes commonly contain the following:

30" EVA tubing

5/8" Medi Clamp

1/2" Drain Fitting

Don't see the drip funnel you need? Ask us!
Drip funnels can be customized to your specifications.

09/21/2021

Rich Industries Inc. specializes in a wide assortment of accessories for many different applications. These would include, PPE, pharmaceutical, environmental, manufacturing and many more.

If you can't find exactly what you're looking for please contact a product specialist at 330-339-4113 and we'd be happy to help find what you need.

09/17/2021

FALL IS RIGHT AROUND THE CORNER, GIVE US A CALL AND PRICE OUR TWO-PIECE SUITS TODAY. GREAT FOR CLEAN UP WORK.
330-339-4113 OR EMAIL US AT [email protected]

Rich Industries, Inc. two-piece suits are made from the finest durable Polyethylene, Polyvinyl Chloride (PVC), high strength Polyurethane, 200 Denier Nylon Polyurethane Coated material and maximum protection from our Multi-layered Laminated Reinforced *Saranex material.

Standard features include an air inlet tube and exhaust, attached boots and dosimeter strap. An attached hood, zipper, or hook and loop front closure are available as options and the extremities can either have attached elastic or be hemmed.

All of our suits are designed and manufactured to provide optimum protection in hazardous environments.Many of our suits as well as other products can be certified incinerable

09/17/2021

Now hiring, set up/utility person. Must be able to do heavy lifting. Go to https://www.richindustriesinc.com
and fill out our online application.

09/14/2021

Aprons

Our aprons are available in thicknesses of .002 through.040 gauge, are designed to meet your most stringent requirements and are made from the finest quality pvc, polyethylene, polyurethane, laminates and coated materials made. With a wide variety of gauges, widths, lengths, materials, and styles to choose from we stand ready to supply your needs.

Finished or unfinished edges are available depending on your preference or need as well as ties that are either attached or folded in the apron..

Sleeves

The all-purpose sleeves designed by Rich Industries provides for the wrist and arm areas of the body.

We can construct any length of sleeve required, supply from a wide array of plastic or fabrics. The sleeves may be held in place with various fasteners including elastics, rubber bands, snaps or hook and loop fasteners

09/09/2021

Now Hiring!!!
Press operators needed for immediate openings!
NOW HIRING!
COMPETITIVE WAGES
COMPETITIVE BENEFITS
CURRENTLY DAY SHIFTS
AIR CONDITIONED FACILITY
COME WORK WITH US TO MAKE OTHER’S LIVES BETTER AND WE WILL WORK WITH YOU TO MAKE YOUR LIFE BETTER
APPLY IN PERSON OR ONLINE
2384 BRIGHTWOOD RD SE
[Email hidden]
www.richindustriesinc.com
330-339-4113

Rich Industries, Inc.

11/22/2021

11/02/2021

10/25/2021

10/13/2021

10/11/2021

10/11/2021

10/08/2021

09/21/2021

09/17/2021

09/17/2021

09/14/2021

09/09/2021

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm